Eco-ConMould WB
Eco-ConMould WB Ecopro Johor Bahru (JB), Malaysia, Gelang Patah Supplier, Suppliers, Supply, Supplies | Trustion Marketing Sdn Bhd
Description
ConMould WB is developed to provide our customers with unsurpassed products to suit their specific process and parameter requirements while also facilitating their compliance with stricter environmental regulations and meeting goals for improving sustainability.

ConMould WB is applied to the inner face of shuttering, formwork and moulds, before the casting of concrete. This unique formulated compound provides a barrier and allow an easy release between the cast concrete and the formwork. May also be used to prevent the build-up of concrete on tools, handling equipment and machinery.

Product Features
  • Excellent release performance for aluminium, metal and plywood forms
  • 100 % formulated with renewable vegetable sources
  • Does not contains Volatiles Organic Compound and mineral oil
  • Does not stain concrete

Instruction
Forms surfaces should be cleaned before applying ConMould WB . Remove previous build up of concrete, rust, scale and dirt, and repair any holes or fractures from previous use before applying. ConMould WB is ready to use direct from its container. It may be applied by brush, roller, spray or dipping on forms immediately before pouring concrete.

Typical Characteristics
Appearance Of Product Brown
Specific Gravity, 40 °C 0.94
Viscosity@ 40 °C, Cst (Neat) 32
Cold Test @ -40 °C No Separation
pH, 5% (Dilution 1:5) 9.5

Safety Data Sheet

1. IDENTIFICATION

Product name : ECO-CONMOULD WB
Product code : Fatty Ester WB

2: Hazard(s) Identification

Emergency Overview 
Mild liquid mixture. This product may cause eye and skin irritant. Prolonged exposure to skin may cause irritation. Ingestion may cause gastric distress
 
Health Hazards
Eye Contact: May cause eye irritation
Skin Contact: Mild skin irritation is possible with prolonged contact.
Inhalation: No known effects on respiratory tract.
Ingestion: No known chronic effects.
Flammability Hazards: This product is non-combustible
Reactivity Hazards: None known
Environmental Hazards: Release of this product into the environment is not expected to cause adverse effects.
 
Section 3: Composition/Information on Ingredients
Non-Hazardous Material. This product is a water-based mixture of palm oil ester and nonionic surfactants.

Components % CAS No.
Water > 75 7732-18
Fatty Ester 15 - 20 111-62-6
Linear Alcohol Ethoxylate 1 - 5 68439-46-3


Section 4: First-Aid Measures
Skin Contact: Flush contaminated skin with plenty of water. Consult a physician if irritation develops.
 
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes. If irritation  develops, consult a physician.
 
Ingestion: Do not induce vomiting. If victim is conscious give plenty of water or milk to drink. Get medical attention immediately.

Inhalation: Move exposed person to fresh air. If irritation persists, get medical attention promptly.

Section 5: Fire-Fighting Measures
Extinguishing Media : Water spray, CO2, dry chemical, alcohol-type or universal type foams
 
Firefighting Procedures : For precaution use self-contained breathing apparatus.
 
Fire and Explosion Hazards : No unusual hazards are expected.

Section 6: Accidental Release Measures
May be slippery when wet. Use caution during cleanup. Squeegee or broom spilled material and dispose in accordance with all local, state and federal regulations. Spills may be absorbed by an absorbent material and dispose as solid waste according to your local, state and federal regulations.

Section 7: Handling and Storage
Store material in a cool, dry and well-ventilated area. Keep containers closed and air tight. Avoid freezing.

Section 8: Exposure Controls/ Personal Protection
Ventilation : General local ventilation, no special precautions.
Eye Protection : Wear safety goggles. Protect plalstic lenses.
Gloves : Wear protective floves to avoid possible skin irritation.
Clothing : Wash clothing after use
Wash Requirements : Wash with soap and water
Respirator : None required

Section 9: Physical and Chemical Properties
Appearance of product: Brown
pH ( Conc.): 9.5
Specific Gravity, 40 °C: 0.95
Viscosity@ 40 °C, Cst (Neat): 68
Cold Test @ -40 °C: No Separation

Section 10: Stability and Reactivity
Reactivity : None
Stability : Stable
Hazardous reactions : None
Conditions to avoid : None
Incompatible materials : None
Hazardous decomposition products : None

Section 11: Toxicological Information
Route of Entry: Inhalation. Skin. Eyes.
Toxicological: No hazardous materials present. This product does not contain any ingredient designated by IARC, NTP, ACGIH, WHMIS, EC or OSHA, as proable or suspected human carcinogens.
 
Section 12: Ecological Information
Aquatic toxicity rating not determined. This product is readily biodegradable. Low potential for bioaccumulation. 
 
Section 13: Disposal Considerations
Disposal of Wastes : Disposal should be in accordance with applicable regional, national and local laws and regulations

Section 14: Transportation Information
Not Regulated

Section 15: Regulatory Information
This product is not known to contain any of the carcinogens required to be listed under OSHA Hazard communication standard, 29 CFR 1910.1200(US).

Section 16: Other Information
The information contained herein is based on data considered accurate. The manufacturer makes no warranties, expressed or implied, as to the accuracy, completeness, or adequacy of the information contained herein. The manufacturer shall not be held liable (regardless of fault) to the vendee’s employees, or anyone for any direct, special of consequential damages arising out of or in connection with the accuracy, completeness, adequacy or furnishing of such information.

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version