Eco Proof EP100
ECOPRO ECO PROOF EP 100 is an emulsified PU modified bitumen coating, which dries to form a tough, seamless, flexible vapor proof protective coating.
RECOMMENDED USE FOR
Suitable use at:
- RC roof & floor slabs
- Terraces and balconies
- Planter Box
- Bathroom & wash area
- Basement and fountains
- Suspended floors
- RC gutters and planter boxes,
- Swimming pools & Water tanks
FEATURES & BENEFITS
- Single component, easy to apply.
- High elastic and good adhesion
- Can be applied on damp or wet substrates.
- Non-toxic, non flammable
- Environmentally friendly.
- Good resistance against dilute acids & alkalis, chloride and sulphate ions.
- Good adhesion to most building substrates
- Seamless/joint free.
Approximately 1.5kg/m2 for 1mm thickness
New concrete should be cured for at least 28 days .The area to becoated has to be clean, dry and free from oil,grease and dust. All contamination that could interfere with the adhesion of the coating has to be removed. Leaks and water infiltrations must be eliminated.Remove free-standing water,
repair excessive cracks and resurface exposed aggregate and small voids with a suitable high-strength, fast curing, nonshrinking product.
Prior to application, stir ECOPRO ECO PROOF EP 100 thoroughly for 1 minute in order to achieve a homogeneous mixture.Over mixing must be avoided to minimise air entrainment.
1. Apply latex primer ECOPRO LATEX for basecoat to enhance the adhesion strength.
2. Apply 2 neat topcoats of ECOPRO ECO PROOF EP 100.
12 months from the date of manufacture if stored properly in original, unopened and undamaged sealed packaging in dry conditions.
Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be removed mechanically.
ECOPRO ECO PROOF EP 100 is non-toxic. For personal precautions, applicators are recommended to wear gloves,mask and goggles when handling it. In case of a contact, the affected area should be washed with plenty of water and soap; in case of swallowing, a physician should be consulted immediately. No food or beverages should be brought to the application area. The productshould be stored and kept out of reach of children.
Specification Gravity (g/cm3)(ISO 2811): 1.23 ± 0.05
Solid Content, %: 58-62
Elongation (%) (ASTM 412): ≥ 800
Tensile Strength (kgf/cm2) (ASTM 412): ≥15
Tear Resistant (kgf/cm) (ASTM D624): ≥ 6
Hardness (Shore A) (ASTM D2240): 35-25
Watervapor Transmission of Material (ASTM E96): 0.49