Eco Proof EP 200
ECOPRO ECO PROOF EP 200 is a water based one part elastomeric liquid waterproofing emulsion. It is flexible, high tensile strength and designed as exposed waterproofing coating.
RECOMMENDED USE FOR
Suitable use at:
- R.C. walls
- plastered walls
- Retaining structure
- Concrete/flat roof
- Slate or metal roof tiles
- Asbestos cement sheets
- Retaining walls
- Metal roof
FEATURES & BENEFITS
- Single component, ready to use
- Easy to applied by roller and brush
- Flexible and elastomeric
- Protects concrete spalling and has anticarbonation properties
- Crack bridging capabilities
- High elastic and good adhesion
- Environmental friendly and non toxic
- Excellent weather resistance
- No blistering, cracking and peeling
Can be kept for 12 months minimum in the original unopened pails in dry places
White, Grey, Green
New concrete should be cured for at least 28 days .The area to becoated has to be clean, dry and free from oil,grease and dust. All contamination that could interfere with the adhesion of the coating has to be removed.Leaks and water infiltrations must be eliminated.Remove free-standing water, repair excessive cracks and resurface exposed aggregate and small voids with a suitable high-strength, fast curing, non-shrinking product.
Prior to application, stir ECOPRO ECO PROOF EP 200 thoroughly for 1 minute in order to achieve a homogeneous mixture.Over mixing must be avoided to minimise air entrainment.
1. Apply latex primer ECOPRO LATEX for basecoat to enhance the adhesion strength.
2. Apply 2 neat topcoats of ECOPRO ECO PROOF EP 200
Clean all tools and application equipmentwith water immediately after use. Hardened / cured material can only be removed mechanically.
ECOPRO ECO PROOF EP 200 is non-toxic. For personal precautions, applicators are recommended to wear gloves,mask and goggles when handling it. In case of a contact, the affected area should be washed with plenty of water and soap; in case of swallowing, a physician should be consulted immediately. No food or beverages should be brought to the application area. The productshould be stored and kept out of reach of children.
Form: Liquid Emulsion
Specification Gravity (g/cm3)(ISO 2811): 1.2 -1.3
Solid Content (%): > 50
Elongation (%) (ASTM 412:13): >400%
Tensile Strength (MPa) (ASTM 412:13): 6.5
Tear Resistant (kgf/cm) (ASTM D624): >35
Hardness (Shore D) (ASTM 2240): 70-60